Post by Mystique R333 on Jul 28, 2009 16:17:01 GMT 10
I was advised that: rather than have the current trend of acrylic siliconed and screwed to the face of the window surrounds, to get proper framed windows. The face fitting method is difficult to get right and waterproof, whereas the framed units tend to be easier to fit without leaking and add strength to the cabin.
I was advised to try Aquarian Marine Windows www.boatwindows.com.au/at Factory 5, 28-30 Lipton Drive, Thomastown VIC 3074, Ph.(03) 9469 5811 and talk to Paul. He advised that rather than have one window made that would only slightly match the old one to have both windows built new (two cost only about 50% more than one as it is the setup that takes time. New rubber seals in old alloy frames are not as good a seal as new rubber in new frames. When he quoted the price of just $250 with me picking up and delivering FOR TWO FRAMES and WINDOWS, I had no logical choice but to say yes! I'd been quoted that much per window for just the face mounted cut out acrylic by two boat builders!
Yesterday, I picked up the new beautiful black powder coated frames with new smoke acrylic 10mm bigger all round than the old ones (so that by tracing new frames and recutting holes a perfect fit is possible). They look a 'million bucks' and fitting will be easier too. I can certainly recommend Aquarian Marine Windows as the place to get custom rolled windows - might even get a new hatch made one day! When I dropped off the new windows at the boat builder, he was surprised too at how low cost they were.
Paul actually said he likes the little jobs (where other manufacturers won't touch small custom jobs) so a perfect source for those of us refitting old craft. Take along the old unit and get all new ones made rather than put new acrylic in old frames would be my advice.
I was advised to try Aquarian Marine Windows www.boatwindows.com.au/at Factory 5, 28-30 Lipton Drive, Thomastown VIC 3074, Ph.(03) 9469 5811 and talk to Paul. He advised that rather than have one window made that would only slightly match the old one to have both windows built new (two cost only about 50% more than one as it is the setup that takes time. New rubber seals in old alloy frames are not as good a seal as new rubber in new frames. When he quoted the price of just $250 with me picking up and delivering FOR TWO FRAMES and WINDOWS, I had no logical choice but to say yes! I'd been quoted that much per window for just the face mounted cut out acrylic by two boat builders!
Yesterday, I picked up the new beautiful black powder coated frames with new smoke acrylic 10mm bigger all round than the old ones (so that by tracing new frames and recutting holes a perfect fit is possible). They look a 'million bucks' and fitting will be easier too. I can certainly recommend Aquarian Marine Windows as the place to get custom rolled windows - might even get a new hatch made one day! When I dropped off the new windows at the boat builder, he was surprised too at how low cost they were.
Paul actually said he likes the little jobs (where other manufacturers won't touch small custom jobs) so a perfect source for those of us refitting old craft. Take along the old unit and get all new ones made rather than put new acrylic in old frames would be my advice.
